Measuring thickness in thin NbN films for superconducting devices

We present the use of a commercially available fixed-angle multi-wavelength ellipsometer for quickly measuring the thickness of NbN thin films for the fabrication and performance improvement of superconducting nanowire single photon detectors. The process can determine the optical constants of absorbing thin films, removing the need for inaccurate approximations. The tool can be used to observe oxidation growth and allows thickness measurements to be integrated into the characterization of various fabrication processes

Bridging the gap between nanowires and Josephson junctions: a superconducting device based on controlled fluxon transfer across nanowires

The basis for superconducting electronics can broadly be divided between two technologies: the Josephson junction and the superconducting nanowire. While the Josephson junction (JJ) remains the dominant technology due to its high speed and low power dissipation, recently proposed nanowire devices offer improvements such as gain, high fanout, and compatibility with CMOS circuits. Despite these benefits, nanowire-based electronics have largely been limited to binary operations, with devices switching between the superconducting state and a high-impedance resistive state dominated by uncontrolled hotspot dynamics. Unlike the JJ, they cannot increment an output through successive switching, and their operation speeds are limited by their slow thermal reset times. Thus, there is a need for an intermediate device with the interfacing capabilities of a nanowire but a faster, moderated response allowing for modulation of the output. Here, we present a nanowire device based on controlled fluxon transport. We show that the device is capable of responding proportionally to the strength of its input, unlike other nanowire technologies. The device can be operated to produce a multilevel output with distinguishable states, which can be tuned by circuit parameters. Agreement between experimental results and electrothermal circuit simulations demonstrates that the device is classical and may be readily engineered for applications including use as a multilevel memory

Advanced Technologies for Green Hydrogen Production

Hydrogen represents a versatile fuel that has found usage in several sectors, such as automotive, aerospace, chemical industries, etc. Today, fossil fuels, due to their high hydrogen content, are the dominant source of hydrogen production and steam methane reforming is the most widely used technology: over 95% of the current production of hydrogen is based on the reforming of fossil fuels. However, in the near future, in order to reduce fossil CO2 emissions, hydrogen production is expected to gradually shift toward green solutions

Instabilities in two flavor quark matter

I discuss briefly the instabilities of two flavor quark matter, paying attention to the gradient instability which develops in the g2SC phase in the Goldstone $U(1)_A$ sector.Comment: 6 pages. Talk given at QCD@Work07, Martina Franca (Italy). Some typos corrected, one reference adde

Instabilities in two flavor quark matter

I discuss briefly the instabilities of two flavor quark matter, paying attention to the gradient instability which develops in the g2SC phase in the Goldstone $U(1)_A$ sector.Comment: 6 pages. Talk given at QCD@Work07, Martina Franca (Italy). Some typos corrected, one reference adde

Experimental Evaluation of a Full-Scale HVAC System Working with Nanofluid

Nowadays, energy saving is considered a key issue worldwide, as it brings a variety of benefits: reducing greenhouse gas emissions and the demand for energy imports and lowering costs on a household and economy-wide level. Researchers and building designers are looking to optimize building efficiency by means of new energy technologies. Changes can also be made in existing buildings to reduce the energy consumption of air conditioning systems, even during operational conditions without dramatically modifying the system layout and have as low an impact as possible on the cost of the modification. These may include the usage of new heat transfer fluids based on nanofluids. In this work, an extended experimental campaign (from February 2020 to March 2021) has been carried out on the HVAC system of an educational building in the Campus of University of Salento, Lecce, Italy. The scope of the investigation was comparing the COP for the two HVAC systems (one with nanofluid and the other one without) operating concurrently during winter and summer: simultaneous measurements on the two HVAC systems show that the coefficient of performance (COP) with nanofluid increased on average by 9.8% in winter and 8.9% in summer, with average daily peaks of about 15%. Furthermore, the comparison between the performance of the same HVAC system, working in different comparable periods with and without nanofluids, shows a mean increase in COP equal to about 13%

A Critical Analysis of the Oxy-Combustion Process: From Mathematical Models to Combustion Product Analysis

Fossil fuels are the most widely used resource for energy production. Carbon dioxide (CO2) emissions are correlated with climate change, and therefore these emissions must be reduced in the future. It is possible by means of many different technologies, and one of the most promising seems to be oxyfuel combustion. This process, with oxygen and recirculating gas, produces a concentrated stream of CO2 and water. In recent years, many scientists carried out research and studies on the oxyfuel process, but a sufficient level of knowledge was not yet reached to exploit the great potential of this new technology. Although such areas of research are still highly active, this work provides an overview and summary of the research undertaken, the state of development of the technology, and a comparison of different plants so far

Numerical Evaluation of a HVAC System Based on a High-Performance Heat Transfer Fluid

none4Nanofluids have great potential to improve the heat transfer properties of liquids, as demonstrated by recent studies. This paper presents a novel idea of utilizing nanofluid. It analyzes the performance of a HVAC (Heating Ventilation Air Conditioning) system using a high-performance heat transfer fluid (water-glycol nanofluid with nanoparticles of Al2O3), in the university campus of Lecce, Italy. The work describes the dynamic model of the building and its heating and cooling system, realized through the simulation software TRNSYS 17. The use of heat transfer fluid inseminated by nanoparticles in a real HVAC system is an innovative application that is difficult to find in the scientific literature so far. This work focuses on comparing the efficiency of the system working with a traditional water-glycol mixture with the same system that uses Al2O3-nanofluid. The results obtained by means of the dynamic simulations have confirmed what theoretically assumed, indicating the working conditions of the HVAC system that lead to lower operating costs and higher COP and EER, guaranteeing the optimal conditions of thermo-hygrometric comfort inside the building. Finally, the results showed that the use of a nanofluid based on water-glycol mixture and alumina increases the efficiency about 10% and at the same time reduces the electrical energy consumption of the HVAC system.openColangelo, Gianpiero; Raho, Brenda; Milanese, Marco; de Risi, ArturoColangelo, Gianpiero; Raho, Brenda; Milanese, Marco; de Risi, Artur

NNLO Logarithmic Expansions and High Precision Determinations of the QCD background at the LHC: The case of the Z resonance

New methods of solutions of the DGLAP equation and their implementation through NNLO in QCD are briefly reviewed. We organize the perturbative expansion that describes in $x$-space the evolved parton distributions in terms of scale invariant functions, which are determined recursively, and logarithms of the ratio of the running couplings at the initial and final evolution scales. Resummed solutions are constructed within the same approach and involve logarithms of more complex functions, which are given in the non-singlet case. Differences in the evolution schemes are shown to be numerically sizeable and intrinsic to perturbation theory. We illustrate these points in the case of Drell-Yan lepton pair production near the Z resonance, analysis that can be extended to searches of extra $Z^{\prime}$. We show that the reduction of the NNLO cross section compared to the NLO prediction may be attributed to the NNLO evolution.Comment: 5 pages, 2 figures. Talk given at QCD@work 2007, Martina Franca, Italy, 16-20 June 2007. To be published in the American Institute of Physics (AIP) conference proceeding

The Search for Extra Neutral Currents at the LHC: QCD and Anomalous Gauge Interactions

Extensions of the Standard Model with extra neutral currents due to additional anomalous abelian gauge factors are considered. We summarize the main features of the effective action associated to these theories. They are characterized by an axion-like particle (the {\em axi-higgs}) which can be (almost) massless, with its mass generated non-perturbatively in the QCD vacuum as for an ordinary Peccei-Quinn axion, but that can also mix with the scalars of the Higgs sector, becoming a heavy axion. We briefly describe the interplay between the electroweak and the QCD sectors in these types of theories, which emerge either from special vacua of string/brane theory; from partial decoupling of a heavier fermion sector or from an anomaly inflow in the context of models with extra dimensions.Comment: Talk given at QCD@work 2007, Martina Franca, Italy, 16-20 June 2007, 5 pages, 2 figures. To be published in the American Institute of Physics (AIP) conference proceeding